Description
When you're working on hydraulic lines or plumbing repairs around the farm, you sometimes need to connect different sized pipes or fittings. This galvanized reducer bushing makes that job simple, stepping down from a 3/4 inch female connection to a 1/4 inch male connection. It's the kind of fitting that saves the day when you need to adapt older equipment to newer components or make a quick repair with what you have on hand.
Key Features
- Threaded connections screw in tight and stay put under pressure
- Galvanized coating resists rust and corrosion even in wet conditions
- Male NPT threads on the outside, female NPT threads on the inside for versatile connections
- Heavy-duty construction handles hydraulic pressure and plumbing applications
Built for Real Farm Work
This fitting works great in hydraulic systems where you need to connect different sized lines or components. You'll find it handy for remote hydraulic outlets, loader connections, and auxiliary hydraulic systems on tractors and equipment. It's also perfect for shop air lines, water systems, and any plumbing project where you need to reduce pipe size.
Made to Last
The galvanized coating gives this bushing long-term protection against moisture, chemicals, and the general abuse that farm equipment dishes out. It's built with the same quality standards as the original fittings on your equipment, so you know it'll hold up to working pressure and temperature swings.
Installation Notes
Thread the male end into your 3/4 inch female fitting first, then connect your 1/4 inch component to the female end. Use pipe thread sealant or tape on the threads for the best seal. Hand-tighten plus one or two turns with a wrench is usually plenty—don't overtighten and risk cracking the fitting.
This item is a suitable alternative for the following:
108-44235